Vändad Gates Carbon Drive CDN S150

Specifications:
Application:
City
Belt sprocket attachment:
130 mm bolt circle diameter, 5-arm
Technical Information:
Series:
CDN
Crank Arm Material:
Aluminium
Belt drive sprocket material:
Composite
Gradation:
46 tooth, 50 tooth, 55 tooth
Crank Arm Length:
170.0 mm, 175.0 mm
Belt line:
depends on the gear hub
Compatible BSA Shell Width:
68 mm
Recommended Bottom Bracket:
4-sided JIS (e.g. Shimano BB-UN300, Thun Zumba)
Belt (rec.):
CDN belt (tooth pitch 11 mm)

Note from the manufacturer:
The CDN system is not approved for mountain bikes, e-bikes with a mid-motor or gearbox

Features:
CDN level: cost-effective CenterTrack variant
suited for city and asphalt roads
middle guide groove (CenterTrack)
crank with mounted CDN pulley: time saving during set-up
generates the required belt line
concentric mounting minimises fluctuations in belt tension
matt black anodised crank arms

Technology:
Gates Carbon Drive System
The main advantages of the Gates Carbon Drive system are cleanliness, smoothness and robustness. Urban commuters as well as mountain bikers, e-bike users or leisure riders benefit from the high mileage. Oil-stained or rusty chains are a thing of the past.
Clean: No lubricant means no accumulation of grease and dirt.
Smooth and silent operation: no metal-to-metal contact of the chains.
Light: The whole system weighs less than a standard bicycle chain.
No elongation: Belt does not need to be re-tensioned or replaced.
Self-cleaning: CenterTrack and MudPort profiles are specially designed to repel mud, dirt, snow or other contaminants.
Consistent efficiency: The drive boasts a long service life compared to that of a conventional chain, where efficiency is significantly reduced by wear or dirt.
Installing a Gates Carbon Drive Belt Drive requires a specially-made frame, therefore we strongly advise against using one to modify a conventional framework.

Contents:
1 x Gates S150 right crank arm
1 x Gates S150 left crank arm
1 x Gates CDN Belt Drive Sprocket, mounted (46, 50 or 55-tooth)
2 x crank bolts