
Skate Sharpening Tool Zandstra 3M
Zandstra 3M touring skate sharpening tool features a 25 cm triangular aluminium profile with three replaceable abrasive strips (40, 30 and 3 µm).
- 3 abrasive strips included
- 40, 30 and 3 µm grit grades
- 25 cm aluminium profile
- Mirror-like blade finish
Overview
Skate Sharpening Tool Zandstra 3M
Zandstra 3M is a high-quality sharpening and polishing tool designed for finishing touring ice skate blades and achieving a smooth, mirror-like gliding surface. It features a 25 cm long triangular aluminium profile with self-adhesive 3M abrasive polishing strips of different grades on its three sides.
The micro aluminium oxide abrasive enables precise and consistent blade polishing. The tool comes with three different grades: 40 microns (blue), 30 microns (green) and 3 microns (pink). Progressively finer abrasives help remove minor surface imperfections and produce an exceptionally smooth finish. Additional 9-micron (light blue) and 12-micron (yellow) polishing strips are available separately. All abrasive strips can be individually replaced when worn.
Directions for use: Secure the skates in a sharpening jig and begin with the blue 40-micron strip, slowly moving the tool backwards and forwards along the blades. Use the entire abrasive surface. After approximately one minute, when friction decreases, switch to the green 30-micron strip. After another minute, finish with the pink 3-micron strip until resistance disappears.
The complete polishing process usually takes 3–5 minutes. To check the result, inspect the blade's gliding surface. A properly polished blade should have a mirror-like finish. If necessary, repeat the final polishing steps using the green or pink strip.
Technical specifications:
Manufacturer: Zandstra
Model: 3M
Application: Touring ice skate blade finishing and polishing
Construction: Triangular aluminium profile
Length: 25 cm
Abrasive material: 3M polishing film with micro aluminium oxide
Included: 40 µm blue, 30 µm green and 3 µm pink abrasive strips
Optional grades: 9 µm light blue and 12 µm yellow strips, sold separately
Abrasive strips: Self-adhesive and replaceable
Recommended polishing time: 3–5 minutes